锻件厂家
您当前的位置 : 首 页 > 产品中心 > 合金结构钢

20-40CrMo

2019-10-31
20-40CrMo
详细介绍:

强度、淬透性高,韧性好,淬火时变形小,高温时有高的蠕变强度和持久强度。用于制造要求较35CrMo钢强度更高和调质截面更大的锻件,如机车牵引用的大齿轮、增压器传动齿轮、后轴、受载荷极大的连杆及弹簧夹,也可用于 2000m以下石油深井钻杆接头与打捞工具等。


热处理规范:淬火850℃,油冷;回火560℃,水冷、油冷。


交货状态:以热处理(正火、退火或高温回火)或不热处理状态交货,交货状态应在合同中注明。


自由锻件厂商哪家好,就找唐山盛通锻造有限公司。


High strength, hardenability, good toughness, small deformation during quenching, high creep strength and long-lasting strength at high temperatures. Forgings requiring higher strength and larger quenching section than 35CrMo steel, such as large gears for locomotive traction, supercharger transmission gears, rear axles, extremely loaded connecting rods and spring clips, can also be used Oil deep well drill pipe joints and fishing tools below 2000m.


Heat treatment specification: quenching 850 ° C, oil cooling; tempering 560 ° C, water cooling, oil cooling.


Delivery status: Delivery by heat treatment (normalizing, annealing or high temperature tempering) or no heat treatment, the delivery status should be stated in the contract.

自由锻件

标签

上一篇:20-40CrMnTi2019-10-31
下一篇:20-40Cr2019-10-31

最近浏览:

  • 邮箱
    shegntong3172368@126.com
  • 传真
    0315-3172368
  • 地址
    唐山市开平区郑庄子镇安各庄村南
Copyright © http://www.tsstdz.com/ 唐山盛通锻造有限公司 主要从事于 锻圆厂家,自由锻件,锻件厂家 , 欢迎来电咨询!

备案号:冀ICP备19031670号-1  技术支持:LOGO-3.png