您好!欢迎来到唐山盛通锻造有限公司官方网站!

全国免费咨询热线 hotline

0315-3172368

锻件厂家
您当前的位置 : 首 页 > 产品中心 > 原材料

自由锻件公司

2019-10-31
自由锻件公司
详细介绍:

材料对自由锻件锻压设备的适应性


自由锻件铝合金:锻造变形量很大时,优先选用水压机,否则可任选。


铍合金:优先选用水压机,因慢速下的可锻性良好。


铜合金:优先选用锤、螺旋压力机或曲柄压力机,但对变形速率敏感的青铜和高锌黄铜,应优先选用水压机。


铌合金:锤、螺旋压力机和曲柄压力机,当合金请求高温锻造时,优先选用水压机。


镁合金:因其快速变形的可锻性差,应优先选用水压机。


钼合金:当请求高温锻造时,优先选用锤、螺旋压力机或曲柄压力机。


镍基合金:根据锻件的截面厚度选定;锻造薄的截面(小于12. 7毫米)锻件时,优先选用锤、螺旋压力机、曲柄压力机,否则可任选。


碳钢和低合金钢:锻造含有薄的截面的锻件或氧化皮肃清较难题时,优先选用锤、 螺旋压力机或曲柄压力机,否则可任选。


不锈钢:含有薄截面的锻件,优先选用锤、螺旋压力机或曲柄压力机,否则可任选。


钽合金:高温锻造时,优先选用锤、螺旋压力机或曲柄压力机。


钛合金:含有薄截面的锻件,优先选用锤、螺旋压力机或曲柄压力机,否则可任选。


钨合金:高温锻造时,优先选用锤、螺旋压力机或曲柄压力机。


锆合金:当毛坯有包套时,优先选用水压机(高于760℃);锻造温度低于 760℃的,可任选。


自由锻件公司哪家好,就找唐山盛通锻造有限公司。


Adaptability of materials to free forging press equipment


Free forging aluminum alloy: When the forging deformation is large, the hydraulic press is preferred, otherwise it can be optional.


Niobium alloy: The hydraulic press is preferred because of the good forgeability at slow speed.


Copper alloy: Hammer, screw press or crank press are preferred, but bronze and high-zinc brass, which are sensitive to deformation rate, should be preferred.


Niobium alloys: hammers, screw presses and crank presses. When alloys are required for high temperature forging, hydraulic presses are preferred.


Magnesium alloy: Due to its poorly deformable forgeability, a hydraulic press should be preferred.


Molybdenum alloy: When high temperature forging is requested, hammer, screw press or crank press are preferred.


Nickel-based alloy: selected according to the section thickness of the forging; forging a thin section (less than 12.7 mm) forging, it is preferred to use a hammer, a screw press, or a crank press, otherwise it may be optional.


Carbon steel and low-alloy steel: When forging a forging or a scale with a thin section, it is preferable to use a hammer, a screw press or a crank press, otherwise it may be optional.


Stainless steel: Forgings with a thin section, preferably a hammer, screw press or crank press, otherwise optional.


Niobium alloy: For high temperature forging, hammer, screw press or crank press are preferred.


Titanium alloy: Forgings with a thin section, preferably a hammer, screw press or crank press, otherwise optional.


Tungsten alloy: For high temperature forging, hammer, screw press or crank press are preferred.


Zirconium alloy: When the blank has a wrap, the hydraulic press (above 760 ° C) is preferred; the forging temperature is lower than 760 ° C, optional.

自由锻件公司

标签

上一篇:原材料2019-10-31
下一篇:没有了

最近浏览:

联系方式:

电话:0315-3172368    传真:0315-3172368

邮箱:shegntong3172368@126.com

地址:唐山市开平区郑庄子镇安各庄村南